EvoLogics USBL positioning system estimates a ROV’s coordinates

EvoLogics USBL positioning system estimates a ROV’s coordinates with an accuracy of 0.07% of slant range
January 16, 2012 by
EvoLogics USBL positioning system estimates a ROV’s coordinates
EvoLogics GmbH, Demeter Chaichan

EvoLogics S2C USBL (Ultra-Short BaseLine) underwater positioning system demonstrated a highly accurate performance in a recent series of pool tests, estimating the position of a ROV for baffle bolt inspection in nuclear power plants.

The Submarine System for Inspection (SUSI) ROV, which was developed by AREVA, is a device used for ultrasonic inspection of nuclear reactor vessel baffle bolts. The ROV’s positioning system is required to document time and exact location of each measurement taken as the ROV examines numerous bolts that hold the baffle plates together. Such positioning system must deliver an accurate performance without obstructing or slowing down the inspection procedure.

In December 2011 EvoLogics USBL system was tested in a tracking scenario that emulates the baffle bolts testing procedure. These trials were conducted in a test pool, as such a positioning system must deliver accurate results in a confined space, where noise and multipath challenge the performance of underwater acoustic devices.

An S2C USBL is a combined underwater communication and positioning device that provides both tracking of remote targets and data transmissions. The system implements the S2C (Sweep Spread Carrier) technology, ensuring reliable performance even in noisy environments.

An S2C USBL device with a conical transducer beam pattern served as a transceiver and was mounted at the side of the test pool. An S2C underwater acoustic modem, mounted on the ROV with the transducer pointing vertically upwards, was used as a transponder. The ROV was located at the bottom of the pool within the transceiver’s transducer beam.

The S2C USBL system estimated the distance to the ROV with a highly accurate result: the RMS deviation comprised 0.04° at 2.1m distance. This result corresponds to an accuracy of 0.07% 1 drms of slant range.

To verify the results, the ROV was moved across a vertical 85 x 100 mm testing grid with reference points that represented the actual baffle bolts. The system demonstrated consistent results and the accuracy of 0.07% of slant range was confirmed.

EvoLogics experts were satisfied with the system’s performance and found it suitable for tracking the ROV for baffle bolt inspections.

EvoLogics GmbH is a Berlin-based manufacturer of underwater acoustic communication systems, acoustic positioning systems and other solutions for the maritime industry.

AREVA is the market leader in the design and erection of nuclear power plants and research reactors, and in modernization, maintenance and repair of these facilities, in the design and supply of instrumentation & control (I&C) systems and electrical systems, and in heavy component manufacture, and the supply of fuel assemblies for many reactor designs.

The Submarine System for Inspection (SUSI) is used for visual inspection of reactor pressure vessels; internals, reactor coolant lines, reactor coolant pumps as well as a carrier for the ultrasonic inspection of the baffle bolts.

EvoLogics GmbH 
Ackerstrasse 76 
13355 Berlin 
Germany

Tel: +49 (0) 30 4606 8226
Fax: +49 (0) 30 4606 8215
E-mail: info@evologics.de
Web: http://www.evologics.de

EvoLogics USBL positioning system estimates a ROV’s coordinates
EvoLogics GmbH, Demeter Chaichan January 16, 2012
Share this post
Our blogs
Archive